WEIMI / INSTALLED PROFILE REVIEW
The base fits.
Check what extends beyond it.
Cabinet + actual attachments + circulation path.
Introduction
The proposed vending cabinet fits inside the rectangle on the floor plan. Later, a payment reader, promotional panel or other attachment is added above the base. The rectangle still fits, but the actual installed profile has changed. A person walking past the equipment encounters the finished installation, not the original footprint drawing.
This procurement question concerns fixed projections into circulation paths, particularly objects that may be above a cane’s detection range. It differs from the width of an aisle, the swing of an open service door and the reach needed to buy a product. All can matter, but each needs its own evidence.
The U.S. Access Board’s protruding-objects guide provides the public reference for this article. Its requirements apply within their legal scope; we do not determine that scope or certify any machine or site. The three WEIMI models below are public-listing candidates whose actual installed profiles require confirmation.
Quick Answer
The Access Board explains that protruding-object provisions protect people with vision impairments and apply to all circulation paths, not only accessible routes. Its wall-mounted example limits objects with leading edges above 27 inches and below 80 inches to a 4-inch projection. Those values are a scoped U.S. reference, not a blanket allowance for every vending accessory.
Mounting type, leading-edge height, the lower detectable profile and other required space all matter. Do not apply the wall-mounted example automatically to a freestanding cabinet or assume that a floor-standing base protects every attachment. Obtain a project-specific review.
Comparison Table
| Drawing or observation | What it can establish | What it may miss |
|---|---|---|
| Base footprint | The area occupied by the low cabinet body in plan. | An upper reader, sign or cantilevered accessory extending farther. |
| Front elevation | The height and lateral position of visible components. | Their depth into the walking path. |
| Side elevation | Leading-edge heights and projections along that view. | An attachment on another face or the actual route alignment. |
| Installed plan with path marked | The relationship between equipment and circulation. | The height at which the projection occurs. |
| Final site check | The supplied configuration and surrounding conditions. | A later accessory change unless the record is updated. |
Use these views together. A single attractive rendering is not a dimensional installation record.
Who Should Buy This
Use this brief when placing vending equipment beside a walking route, adding a payment accessory or approving a branded surround. It is useful for facilities buyers, distributors coordinating installation and operators updating an existing cabinet.
The equipment supplier can describe the supplied assembly. The site designer or responsible reviewer needs to assess the surrounding circulation space and applicable provisions. The installer needs the approved version. Leaving one party to infer the other’s dimensions creates an avoidable gap between the proposal and the finished site.
Outside the United States, the same drawing discipline can help identify questions, but local requirements must be checked separately. This article does not turn the U.S. dimensions into a worldwide installation specification.
How We Evaluate Smart Vending Machines
We compare public WEIMI retail formats and identify the installation information to request. This is a public-listing procurement shortlist, not independent testing of cane detectability, a dimensional survey or an accessibility certification.
Build an attachment register
List each fixed item included in the final proposal: the cabinet body and any actual reader, display, sign or surround. These are examples to check, not claims that every listed model includes protruding accessories. Record which items come from the machine supplier and which are installed locally.
Use a common drawing reference
Identify the finished floor, cabinet faces and the relevant circulation path on the drawing. Ask for dimensions of the actual projecting edge rather than a guessed value from a photograph. Keep drawing revisions and accessory revisions together so an approved base drawing is not mistaken for approval of a later addition.
Review the final assembly
Compare the installed condition with the agreed drawings before handover. If something differs, record the difference and route it to the responsible reviewer. Do not improvise a barrier, remove a payment component or relocate the cabinet without considering the other requirements affected.
Key Buying Factors
Circulation paths extend beyond corridors
The Access Board guide explicitly includes circulation paths in rooms and spaces, both indoors and outdoors. A cabinet inside a lounge therefore cannot be excluded from review merely because the location is not called a corridor. The reviewer should identify the actual path and the applicable scope.
Height changes the projection question
The guide distinguishes leading edges within cane sweep from edges above that range and below headroom clearance. Measure the relevant edge from the finished surface and use the applicable provision. A sign’s centerline, the top of the cabinet or a shipping dimension may not identify that edge.
Mounting categories are not interchangeable
The guide separately discusses wall-mounted objects and post-mounted objects, with different details. Do not select whichever numerical limit gives the most convenient answer for a freestanding machine. Ask the responsible reviewer how the actual assembly is classified and which measurements are needed.
A lower element needs its own assessment
The guide explains how objects above detectable fixed elements may be assessed from those lower leading edges, subject to other required space. That is not permission to place any box under an accessory. A proposed solution must account for its geometry, fixed condition, required access and potential trip hazards.
Keep route width and customer space in view
The guide notes that projections cannot reduce the required width of accessible routes and that recesses and protective arrangements must accommodate required clear floor space. A projection check does not replace the wider site review. A remedy that blocks customer approach can create another unresolved issue.
Changes after handover matter
A locally supplied advertising panel can alter the installation after the supplier’s drawing was accepted. Assign an owner to review later additions. The record should show the configuration actually present, including which party approved the change for the site.
Best Smart Vending Machines
1. WEIMI WM22 touchscreen snacks and drinks machine
The WM22 public listing describes a 21.5-inch touchscreen, multi-item purchases and different possible merchandise-channel arrangements. It is a candidate for packaged-product selection-and-dispense retail. For this review, request the exact exterior arrangement and any payment hardware included in the quote.
The listing does not establish the projection of a local reader or a site-added sign. Ask whether the dimensional drawing covers the complete supplied assembly. If an accessory is added by another party, incorporate its actual position into the site record rather than assuming the main cabinet drawing includes it.
2. WEIMI single-door AI retail fridge
The single-door AI fridge listing describes open, select and close shopping with camera recognition and cloud management for suitable packaged products. Shortlist it when that retail workflow fits the assortment, then review the actual fixed exterior profile for the intended location.
The customer door’s movement needs a separate assessment from the fixed projection considered here. Obtain the quoted access and payment arrangement without inferring dimensions from the product image. No cane-detection result, headroom assessment or installation compliance is established by the listing.
3. WEIMI dual-cabinet vending machine
The dual-cabinet public listing shows a main and secondary cabinet with spiral merchandise channels and a payment area. It is a candidate for a broader packaged assortment. Ask for the installed arrangement of both cabinets and any connecting or locally supplied components.
Do not reduce the pair to a single generic rectangle if their actual profiles differ. The path may pass beside one cabinet and then the other. The supplier should identify the complete assembly, while the site reviewer assesses how it meets the surrounding circulation space.
Feature Comparison
| Public-listing candidate | Installed-profile question | Unverified evidence to request |
|---|---|---|
| WM22 touchscreen | Does the drawing include the quoted payment and display arrangement? | Actual accessory edge heights and projections. |
| Single-door AI fridge | Which parts are fixed, and which belong to a separate door-movement review? | Exact exterior configuration and site relationship. |
| Dual-cabinet format | Does the record cover both cabinets and any added components? | Complete assembly views and route alignment. |
These are configuration questions, not measurements or rankings. None of the three public listings proves that a proposed installation satisfies protruding-object requirements.
Cost & ROI Analysis
Budget the coordination needed to obtain usable installation evidence. There is no verified return-on-investment estimate for this review. A supplier drawing, a site assessment and any approved modification may have different commercial scopes, so obtain actual quotations.
| Fictional planning assumption | Calculation | Boundary |
|---|---|---|
| Drawing coordination 30 minutes; site review preparation 25 minutes; record update 15 minutes | 70 minutes total | Illustrative internal work only. |
| Assumed staff rate US$30/hour | 70 ÷ 60 × US$30 = US$35 | Hypothetical labor allowance. |
| Assumed later update takes 20 minutes | 20 ÷ 60 × US$30 = US$10 | Sensitivity example, not a quoted change fee. |
All figures are fictional assumptions. They exclude professional fees, travel, fabrication, installation and any operational interruption. They do not quantify accident risk, legal exposure, sales or machine payback. The example simply makes drawing and review work visible in the purchase plan.
Resolve scope before ordering a decorative addition. If the site reviewer requests a change, obtain the actual design and price. Do not assign an invented saving to a recess or protective feature that has not been designed for the installation.
Best Choice by Scenario
A cabinet beside a wall-following route
Request a side profile and the actual path relationship. The Access Board notes that people with vision impairments may use walls as wayfinding cues. A wall location does not automatically remove a projecting attachment from consideration.
A cabinet placed in a room away from a corridor
Identify how people actually circulate through the space. The source makes clear that the provisions are not limited to hallways. Keep furniture and other site conditions in the review rather than assessing the cabinet in an empty rendering.
A machine with a locally installed payment device
Make the local component part of the approved assembly record. Confirm its bracket and final position. The machine supplier’s original dimensions cannot establish the shape of an accessory installed later by another party.
A project considering an alcove or protective element
Have the responsible designer review the proposed arrangement. The guide discusses recesses and detectable elements, but other required space must remain available. This article does not prescribe a construction detail or authorize a site alteration.
Applications
In a workplace, equipment may move when furniture or routes change. Keep the installed profile linked to the current location rather than treating the first drawing as permanent approval for any new position.
At a visitor facility, branding can introduce a sign or display beyond the cabinet body. Include the actual sign structure in the review. High-contrast artwork may help visual recognition, but it does not replace dimensional assessment of a physical projection.
For an equipment distributor, the useful handover is a clearly bounded assembly drawing: what is supplied, what is added locally and what the site reviewer still needs to decide. Avoid implying that a product-level statement settles every customer’s building layout.
FAQ
Does a cabinet footprint show every protrusion?
No. Raised readers, panels or other actual attachments can extend beyond the base. Review the complete installed profile.
Are the cited provisions limited to accessible routes?
The U.S. Access Board guide says protruding-object requirements apply to all circulation paths within their scope, not only accessible routes.
Can we apply the wall-mounted 4-inch example to every machine?
No. Confirm the actual mounting arrangement and applicable provisions with the responsible reviewer. Different categories and conditions have different details.
Does a floor-standing cabinet automatically make every attachment detectable?
No such conclusion is established here. Review the lower profile, projecting edge and actual site geometry together.
Is a projection review the same as checking door swing?
No. Fixed projections, moving doors, required route width and customer approach are separate questions in the wider site assessment.
Does this shortlist certify the three WEIMI models?
No. It uses public retail descriptions to identify procurement questions. No independent dimensional survey or compliance assessment was performed.
Final Recommendation
Approve the finished installation, not just a base rectangle. Record every actual fixed attachment, use complementary drawing views and identify the circulation path. Have the responsible reviewer assess the relevant leading edges, mounting conditions and other site requirements.
Select WM22, the single-door AI fridge or the dual-cabinet format for the retail task, then confirm the supplied physical configuration. A public listing cannot determine the acceptability of a site-added sign or payment bracket. Keep later changes subject to the same documented review.
Source: U.S. Access Board, Guide to the ADA Accessibility Standards: Protruding Objects. It supports the circulation-path, leading-edge and mounting distinctions used here. The linked WEIMI listings support physical retail descriptions only. No legal applicability or product compliance verdict is given.
CTA
Preparing a vending installation drawing? Share your country, intended product range, site layout and proposed accessories with WEIMI. Request a model shortlist and the exact supplied exterior configuration for the project reviewer.
Identify who supplies each attachment and who maintains the final installed-profile record. Confirm unresolved dimensions before approving the location.
